Clients2

CLIENT	PROJECT NAME or LOCATION	PROJECT DESCRIPTION
Arizona DOT	Whiskey Springs, AZ Highway 87	Core drilling on steep slopes for new highway alignment and foundation testing for bridge abutments. Drill moves by hand and boom truck. This project began in February of 1995 and continued through 1997. Multiple rigs and drilling methods were employed for several engineering firms including ADOT
Arizona DOT	Gordon Canyon Project Payson, AZ	Occupied previously drilled holes and installed inclinometers.
Arizona DOT	Interstate 17, AZ	Inclinometer installations on steep failing road cut. Access by hand moves and helicopter.
Arizona DOT	Preacher Canyon, AZ	Multi-drill program in support of highway expansion.
Arizona DOT	Cottonwood Bridge, AZ	Core drilling on steep slopes for new highway alignment. Moves were performed by hand and helicopter.
Arizona DOT	Jerome, AZ	Drilling on steep slopes in support of highway expansion project. All moves were performed by crane.
Arizona DOT	Pinal Pass, AZ	Helicopter moves were required for this steep slope drilling program in support of highway expansion project.
Arizona DOT	Kingman, AZ Highway 93	Core drilling for a Geotechnical investigation for a new highway alignment on Highway 93.
Arizona DOT	U.S. 60	Core drilling off highway on failing road cut.
Arizona DOT	Wickiup, AZ	Multi-phase and multi-rig drill program in support of highway expansion.
Arizona DOT	Payson, AZ Payson Rockslide	SAI responded to an emergency situation following the the Payson rockslide. Portability and recovery were the major concerns. SAI drill personnel responsible for core logging.
Arizona DOT	Sunflower, AZ. Highway 87	Drilling along a new highway alignment to test bridge abutments. Drill sites stretched across remote locations with difficult access from Highway 87.
Arizona DOT	Sunflower, AZ.	Lower Kitty Jo Bridge Project. Drilling for a highway alignment.
Arizona DOT	Sedona, AZ	Drilling in support of highway expansion project.
Arizona DOT	Kaiser Springs, AZ	Core drilling on steep slopes for new highway alignment. Moves by hand or helicopter.
Arizona DOT	Roosevelt Dam, AZ	Difficult access core drilling which required helicopter moves. Drilling was done in support of landslide repair.
Arizona DOT	Ajo, AZ Highway 85	Road widening project on SR85 near Crater Range.
Arizona DOT	Boulders Highway, AZ	Multi-rig program utilizing helicopter for moves, in support of highway expansion project.
Arizona DOT	Apache Junction, AZ.	Road widening project north of Highway 60.
Arizona DOT	Oak Creek Canyon, AZ Highway 88	Road widening project along State Highway 88 on a steep and unstable slope.
Arizona DOT	Globe, AZ	Core drilling in soft formations above the Roosevelt Lake landslide.
AGRA Earth & Environmental	Snowflake, AZ	Core drilling in reservoir losing large amounts of water through fractures.
AGRA Earth & Environmental	ASARCO Ray I, II, AZ	Core drilling through 100+ feet of overburden to test foundation site. Additional drilling of foundation for new building.
AGRA Earth & Environmental	Polk County, OR	Winch and helicopter moves to sites on 50 degree slopes to test failing road cut.
AGRA Earth & Environmental	Cinder Cone, AZ	Borings on cinder cone for tunneling project. Moves by hand and helicopter.
AGRA Earth & Environmental	Lynx Lake, AZ	Angle holes on the dam and spillway to test stability.
Army Corp. Of Engineers	Dalles, OR	Geotechnical coring from a platform over water for dam and reservoir evaluation.
Dept. Of Conservation	Reno, NV.	Geotechnical study on a steep slope for a proposed dam alignment. Vertical and angle holes were drilled using triple tube. Packer tests on each hole.
Barton/Utter Cadillac	Spokane, WA	Augering holes for environmental testing in low overhead area inside car dealership.
City of Unalaska	Dutch Harbor, AK Aleutians Islands	Two monitoring wells and auger drilling with the SAITECH GH5.
Express Lube	Spokane, WA	Augering holes for environmental testing in low overhead area for Express Lube.
Cal Trans	Cloverdale, CA	Borings to evaluate failing road cut on the Cloverdale Bypass.
California DOT	Mendicino Pass, CA	Drilling, piezometer and inclinometer installations on steep slopes.
Bellevue American Journal Plant	Bellevue American, WA	Auger borings inside the American Journal Plant Building for environmental evaluation.
ATT/Alascom	Dutch Harbor, AK	Foundation borings for dam site at new Unalaska water supply dam. Moves by hand and ATV.
CH2M Hill	Snohomish River, WA	Drilling off barge through sediments and logs into pre-glacial deposits.
Capes Homeowners Association	Capes Landslide, OR	Drilling on a residential landslide. Helicopter moves were required due to the steep slopes.
Colorado DOT	Aspen, CO	Drilling on steep slopes for highway widening project between Aspen and Carbondale CO.in 1996,1997, 1998 and 1999. Access to drill site by hand, boom truck and helicopter. Project utilized multiple SAITECH drills.
Colorado DOT	Rampart Dam, CO	Drilling on steep slopes, drill moves were performed utilizing a helicopter. Our crew installed inclinometers.
Colorado DOT	Berthoud Pass, CO	Core drilling on steep slopes in support of new highway alignment.
East Asia Gold Corp.	Union of Myanmar (Burma)	A SAITECH GH3 was purchased by East Asia Gold Corp and SAI provided on-site training for Burmese drill crews.
Echo Bay Mines	Republic, WA	Drilling from a barge in the Echo Bay Mines tailings pond, to evaluate sediment properties for pond expansion.
Boeing Aircraft	Everett Plant, WA	Augering below concrete slab to evaluate environmental contaminates.
Federal Highway Administration	West Yellowstone, MT.	Drilling along side the highway at Gibbon Falls, West Yellowstone Park for a road widening project. This is an extremely congested area due to motor homes and park traffic.
Federal Highway Administration	Lake Mead, NV	Core drilling with the SAITECH GH3 to complete a Geotechnical study for a proposed bridge site.
Federal Highway Administration	Yosemite, CA	Borings for new bridge abutments associated with road widening project.
Federal Highway Administration	Mt. Lemon Highway, AZ.	Borings for bridge and retaining wall foundations off platform on 50+ degree slopes.
Federal Highway Administration	Horse Creek, CA	Drilling off platform in the creek to determine stability of new bridge pier.
Federal Highway Administration	Heber, UT	Heber City Project, drilling on a landslide area.
Federal Highway Administration	Duchesne, UT	Core drilling on steep slopes for bridge abutment sites.
Federal Highway Administration	Gunnison, CO	Borings to evaluate locations for new bridge abutments and piers on the Taylor River in Gunnison County, CO.
Federal Highway Administration	Whiskey Town Project, CA	Drilling within the Whiskey Town National Recreation Area.
Federal Highway Administration	Sequoia National Park, CA	Core drilling for proposed rock cut and retaining walls within the Sequoia National Park.
Federal Highway Administration	Mt. Rainier National Park,WA.	Drilling on failing retaining walls within the park boundary. Drill was suspended from a tracked excavator.
Washington State University	WSU Engineering Bldg., WA	Geotechnical coring and SPT's for foundation investigation.
Wash DOT	Seattle, WA	Coleman Dock Project. Environmental borings off barge in Puget Sound.
Idaho DOT	Alpine, WY	Drilling on active landslides with SAITECH-45 and GH-3 for movement stabilization project.
Idaho DOT	Roberts East, ID	Drilling and installation of piezometers and inclinometers.
Idaho DOT	Pocatello, ID	Drilling at Lava Springs with the SAITECH 45
Idaho DOT	Palasades, ID.	Three shift months of drilling was conducted using ring samplers, standard penetration tests and coring.SAITECH 45 and SAITECH GH3 were used and moves done by an 18 ton mounted crane.
Lake Mead National Recreation Area	Saddle Island , NV	Packer tests and deep foundation borings for a proposed intake pumping facility. This drilling program utilized the SAITECH GH3, and the SAITECH 45 for several months in 1995 and 1996. Drilling was conducted in a tortoise protected area.. Permitting restrictions required recovery of all drilling fluids. SAI's recovery record is 100% Moves by hand and helicopter.
Lake Mead National Recreation Area	Lake Mead, NV	Tunnel alignment for the Las Vegas aqueduct. Drilling in protected tortoise habitat with the SAITECH GH5. Permitting restrictions required recovery of all drilling fluids. Our record is 100% recovery. Moves were done by hand and helicopter.
Lincoln Co., WA	Lincoln County Bridge, WA	Core drilling for bridge abutments.
Multnomah County, OR	McCoy Bldg., OR	Drilling in basement of buildings for earthquake liquefaction studies.
Oregon DOT	Rockaway Landslide, OR	Core drilling in active landslide adjacent to Highway 101.
Union Pacific Railroad	Moyie Springs, ID	Core drilling for bridge pier locations for new trestle. Access by rail and crane.
Burlington Northern Railroad	Cocolalla, ID	Core drilling for new railroad bridges.
Burlington Northern Railroad	Cascade Tunnel, WA	Core drilling on steep snow covered slopes. Foundation tests for new structure.
Chelan County	Tumwater Dam, WA	Core drilling from barge on dam spillway. Access by helicopter.
Penn. DOT	Northampton/Bethlehem, PA.	Drilling for a proposed bridge crossing the Leigh River. This project utilized "clay impressions" oriented core and core size varied from NQ to HQ.
SAM Cal	Phoenix, AZ	Exploratory drilling to test ground stability in housing development. Another phase of the project is to drill holes for grout pumping to stabilize foundations.
Seattle Public Utilities	Lake Sammamish, WA	Drilling off barge to determine ground conditions for utilities conduit alignment.
Seattle Public Utilities	Landsburg Dam, WA	Installation of piezometers and monitoring equipment on dam piers. Highly sensitive environmental area.
Spokane County	Lincoln Street Bridge, WA	Drilling off platform at a 45 degree angle to determine stability for new bridge.
Unalaska	Icy Creek Dam, AK	Foundation borings for dam site at new Unalaska water supply dam. Moves by hand and ATV.
US Navy	Red Hill NAS, HI	Exploratory drilling in underground tunnels to test for possible leaks in fuel tanks.
W&H Pacific	The Dalles, OR	Core drilling in support of a proposed tunnel. Railroad crane utilized to move drill rig.
Wanapum County	Wanapum Dam, WA	Drilled holes perpendicular to draft tubes from a scaffolding to check stability.
Washington Water Power	Spokane WA.	Drilling to recover samples of riverbed sediments to evaluate bedrock.
Washington Water Power	Spokane, WA.	Nine Mile Dam Project. Drilling and SPT'S in 15 feet water.
Washington Water Power	Spokane River Penstock, WA.	Core drilling for penstock alignment at the Monroe St. power house.
Wash DOT	Port Angeles, WA Seibert Creek	Geotechnical study for a bridge foundation on a steep slope.
Wash DOT	Coleman Dock: Seattle, WA	Environmental coring, utilizing 2" split spoons, shelby tubes and diamond coring in 60 feet of water. Vaneen samples were taken on a course grid.
UDOT	Salt Lake City, UT	Preliminary alignment holes for the Legacy Highway. Three SAITECH GH3's drilled using ring samplers with blow counts. A Hammer calibration test was conducted.
UDOT	Provo Canyon, UT	A SAITECH 45 was used from above the tunnel portals to investigate a common crack running throughout two roadway tunnels. Inclinometer data was used to determine the severity of the crack.
UDOT	Hurricane Bridge, UT	Core drilling abutment sites on steep slopes at edge of 200' cliff. Oriented core.
UDOT	Park City, UT	Difficult access drilling, helicopter moves in support of highway expansion project.
UDOT	Echo Canyon Slide, UT	Difficult access coring using helicopter for moves. Piezometer and inclinometer installations were completed.
UDOT	Legacy Highway	Multi-rig drilling and coring project on steep slopes for highway expansion project. Helicopter was utilized for moves
Union Pacific Railroad	Sandpoint, Idaho UPRR Bridges Project	Coring abutment and pier sites for four new railroad bridges.
Union Pacific Railroad	Lyle Siding, WA	Drilling alongside railroad on steep slopes. Moves were provided by crane and rail car.
Union Pacific Railroad	Stampede Pass Tunnel, WA	Up-vertical and horizontal core holes inside railroad tunnel
Washington DOT	Ostrander Tunnel, WA	Core drilling on steep slopes above failing tunnel. Access by winch and helicopter.
Washington DOT	Centralia, WA	Drilled test holes and installed piezometers.
Washington DOT	Eatonville, WA	Dilled test holes for slide and installed inclinometers.
Washington DOT	Kettle Falls, WA	Drilling test holes for slide. Access to sites by boat.
Washington DOT	Bellevue Tunnel, WA	Borings in fill and overburden for tunnel under tracks.
Wyoming DOT	Greybull Landslide, WY	Drilling on steep landslide to determine slide plane.

Salisbury & Assoc., Inc.
P.O. Box 377
Chewelah, WA 99109
Phone 509-935-0720
Fax: 509-935-6047
email: saitech@gotsky.com

The following table is a partial listing of Geotechnical, Environmental, and Mineral Exploration projects completed 1996 through 1999. -We would be glad to send you a more complete list, including the engineering and mineral firms and state or federal regulatory agencies.

CLIENT

PROJECT NAME or LOCATION

PROJECT DESCRIPTION